24.7.2013

This Q&A is a bit unusual. As you probably know, SerB’s in Paris (hence the Hitler video) and Storm’s on vacation, so I’m going to translate some of the stuff, posted by a “developer” (in reality, a chief of community) Evilly in this thread – it’s about clanwars. I am not sure how much of it applies for EU/US servers, but I’ll try to translate to the best of my knowledge.

Please note that as I have never played clanwars and I have very little understanding of its mechanics, the translation might be of worse quality than usual. Feel free to correct me.

- new season starts in October
- apparently there are no plans to reward CW players with vehicles with crew that has perks/skills
- there will be other ways for clans to compete with each other apart from clanwars
- for second campaign, you will also need tier 1 + T2-T10 vehicles, so don’t sell them (“The same vehicles you currently need for various company tiers”)
- in campaign, if you get accidentally removed from a clan after playing some battles and then you are accepted back, when it comes to reward battle requirement, those battles (before you were kicked) do count, the countner doesn’t reset
- as the second campaign reward there will be a choice between either the M60, or the other reward tanks (Failowe, Object 907)

Update: yes, the players will be able to choose a reward

Chi-Nu Kai, quick rundown

Hello everyone,

I asked several players (Soukoudragon, Daigensui) who know their stuff about the upcoming tier 5 Japanese (yes, it will be Japanese) premium medium tank: Chi-Nu Kai (improved). Here’s a bit of info about it:

Basically, it’s a Chi-Nu hull with a Chi-To turret and a better gun.

To quote Soukoudragon:

The gun is the Type 5 75mm model 2 cannon. No auto loader. It’s pen should be a little better than the US 76mm. Front hull armor is 50. The Turret is a Chi To turret with 75mm armor on the front. Engine is 240hp. I don’t think gun depression was good on this turret.

Also, some info about the gun from Daigensui:

Given the relatively large explosive filler of the AP shells, I’m thinking of it as a 85 mm ZiS S-53 with 75 mm Vickers HV level accuracy and slow aim time.

Proposed gun statistics:

Name: Name: 75 mm Gun Type 5
Ammo: 60
Damage: 160/160/280 HP
Penetration: 120/161/43 mm
Shell Price: 56 /7 /56
Rate of Fire: 15.38 r/m
Accuracy: 0.36 m
Aim Time: 2.9 s

Daigensui explains its history:

The Type 3 Kai is the post-war popular designation of the proposed upgrades to the Type 3 Chi-Nu. Given the late development of the Type 4 Chi-To and Type 5 Chi-Ri, the IJA needed a tank that could actually counter the M4 Sherman and other tanks of the Allies. To this end it was decided to put the Type 5 75 mm Tank Gun one way or another on the Type 3 Chi-Nu, with expanded use of welding to strengthen the hull and adding some armor.

There were two proposals for installing the Type 5 75 mm Tank Gun on the Chi-Nu: Using the turret of the Type 4 Chi-To, or adapting the Tank Gun for the turret of the Chi-Nu. On March 19, 1945, tests using the Chi-To turret were conducted at the Irago Firing Ground, and it was deemed that the handling of the tank was unaffected, and the results were satisfactory.

Based on the above historical facts, I believe that having the Type 3 Kai as a premium tank would be good for fans of Japanese tanks. The Type 3 Kai is somewhat of a mixture of the Matilda Black Prince and the PzKpfw IV Schmalturm, given that we’re putting a big turret with a gun similar to the 75 mm Vickers HV on top of a weaker hull. It’s also similar to the PzKpfw 38 nA in that it’s an improvement over the original form by incorporating more welding to make a stronger vehicle.

The Type 3 Kai should be a great long and medium range fire support, based on its Type 5 75 mm Tank Gun and relatively armored turret. In addition, the top speed of 39 km/h based on a 240 hp engine would make it more nimble than the PzKpfw IV Schmalturm, thus allowing it to be a fairly good mobile sniper.

8.7 patchnotes

Source: http://worldoftanks.com/en/news/17/update-notes-8-7/

Download the 8.7 installer (EU): http://dl.wargaming.net/wot/eu/files/WoT_0.8.7_eu_install.zip (5GB+)

New Vehicles

- Added the new branch of SPGs in the British tech tree:

Loyd Gun Carriage (tier II)
Birch Gun (tier III)
Sexton II (tier IV)
Bishop (tier V)
Crusader 5.5-in. SP (tier VI)
FV304 (tier VII)
FV207 (tier VIII)
FV3805 (tier IX)
Conqueror Gun Carriage (tier X)

Continue reading

World of Tanks to get Australian server

Source: http://www.vg247.com/2013/07/22/world-of-tanks-to-get-an-australian-server/ – via Daigensui

In a recent interview (yesterday) for games.on.net, World of Tanks representative made a promise to introduce an Australian server to World of Tanks. To quote:

“We don’t have a timeframe yet,” said Wargaming’s South-East Asia CEO Jasper Nicolas to us on Sunday afternoon. “But the political will is there. We are committed to it and we are going to make it happen.”

“We know how important it is to get that ping down even lower, to shave those milliseconds off. We’re doing a lot of research right now to decide where to locate it. But we are going to do it. It is only a matter of time.”

That should make the game better better for the tankers from down under :)